Description

The DDP38 offers an economical and reliable pump for transfer of light to medium viscosity fluids. High flow rates can be achieved easily especially where low back-pressure applications exist. The ability to dry-run allows easy priming while operating without any damage to the pump. The Cast Aluminium body allows this pump to be used with a range of compatible chemicals as well as the new or used oils and engine coolants (RTU), diesel or oily water applications. Fully repairable and spare parts are readily available. Not suitable for flammable liquids. Macnaught Advantage 2-Year warranty for manufactured components and 1-Year warranty on wear components.

Features

• Up to 265 litre / minutes flow rate – Measured with water at the pump outletFitted with band clamps on the inlet and outlet manifolds – Easy dismantling for repairs or clearing blockagesCast Aluminium body – Wide range of chemical Compatibility for broader applicationsAir-Operated pumps can be speed controlled – More control over a pump outputFast fluid transfer for low to medium viscosity fluids – Inexpensive way to move large volumes of fluidEasy self-priming – No damage to pump while running even with little or no fluid flow (for short periods)

Technical Specifications

• Maximum Air Pressure: 690kPa (100psi)Inlet / Outlet Ports: 1.5″ NPT(F)Air Inlet Size/Type: 1/2″ NPT(F)Maximum Flow Rate: 265L/min (viscosity dependant)Suction Lift: 4.6m (dry) / 7.6m (wet)Maximum Solids Handling: 4.76mm (0.188″)Fluid temperature range: -12ºC – 82ºCMaximum Noise level: 77 dB(A)Fluid Compatability: Oils (new & used), Engine Coolants RTU (new & used), oily water, DieselWetted Components: Cast Aluminium (body), Buna N (valve seats, diaphragms, check valves)

Package Includes